Technology Information Corporation

Wave Solder Training

Wave Solder Training Workshop
Completely different than traditional wave solder training. This is down-to-earth, no nonsense training that will help your entire staff right away. With its successful track record, this acclaimed Workshop will give you the tools to attack and eliminate your board defects, prevent their recurrence and document your process every step of the way.   Read More

On-Site Expert Troubleshooting
We are not here to backslap, shake hands or mince words.  We are here to help you big and help you fast with our widely used, proven, copyrighted methods and techniques.  We visit your facility with a single-minded focus on the elimination of your specific board defects.   Read More

Feel free to contact us to discuss your specific needs and objectives.

“The Optimizer identified the root cause of chronic skipping on our boards.  We eliminated the disparallelism it measured.  This had an immediate, positive effect on board quality.”

– Aldrina Paredes, Training manager, Bose Electronics

“Your wave soldering seminar gave us concrete methods and procedures completely different and beyond anything we’ve ever heard or seen from other vendors or ‘experts’.”

– Juan Guevara, SMT and Through Hole Manager, Alps Automotive

“Prior to investing in the Optimizer, we relied on a thermal profiler but we could not solve our skipping and insufficients problems.  In fact, those defects were not due to improper temperatures at all but instead to how our boards run through our solder waves.”

– Ricardo Soto, Process Engineering Manager, Tyco

“The Optimizer made us re-think how we should wave solder.  We shouldn’t blame the board design as often and we cannot rely on a thermal profiler to control our wave process.”

– Martin Orozco, Process Engineer, TRW Automotive

“Your instructor solved our excessive solder and bridging by adjusting our process based on our Optimizer’s data, and showed us how we can easily do this by ourselves.”

– Gary Wirth, Production Supervisor, Honeywell

“The proactive nature of your methodology, which allows us to identify board defects and production issues before they happen, is critical for raising yields.”

– Luis Lopez, Operations Manager, Benchmark Electronics

“Your company walked in here and quickly showed my staff how to reduce defects that we’ve had to live with for a long time.”

– Dennis Herrick, Director of Operations, Condor

“Many of our voids and insufficients were assumed to be design defects.  Your training instructor used our Optimizer’s measurements to make adjustments easily and now we should never see these defects in our production again.  What a relief!”

– Enda Moran, manufacturing Manager, CEL

“Using the Optimizer’s techniques every day on one board type, we saved 257 hours of touch up and rework per month.  This saved our facility over $50,000 in 12 months on this one board type alone.”

– John Lanferman, Process Characterization Group Leader, Celestica

“I have worked with wave solder machines for years and can honestly say that this was the most informative and thorough class that I have attended on this subject.

– Dale Shedd, Process Engineer, Adtran

Contact Us