Technology Information Corporation

Is The Display Screen Essential?

Your Wave Optimizer’s one-of-a-kind, instant LCD display means you will immediately view all data before and after wave machine adjustments.

And because your Wave Optimizer has a four run memory, you can run the device four times and read all data runs BEFORE downloading data to your PC.

The instant LCD display combined with the four run memory combined with comprehensive, accurate data will transform your approach to wave solder process improvements.

This means you will immediately respond to data variations before your board quality suffers.  You’ll instantly compare data for different board types, for different wave machines, for different runs throughout a shift, and from shift to shift.

If indicated, you will immediately make adjustments, measure the results of these adjustments with your Wave Optimizer, and compare these results with previous data runs.  All at your wave machines.

Your team now has the means to meet your high quality expectations.  At the touch of a button.  Get the control at your machine.

 

“We thought we had tried everything possible to eliminate a bridging problem.  Using the Optimizer, in only a couple of minutes we got rid of the bridging completely by adjusting the dwell time.”

– Alfred Santilla, Wave Solder Supervisor, Universal Lighting

“Our main problem was recurring insufficients.  We made many attempts to address the problem, to no avail.  By using the Optimizer to graph our immersion depth, we identified and corrected turbulence in our main wave.  This has benefited our production process.”

– Jose Martinez, Maintenance Engineering Supervisor, Rain Bird

“Using the Optimizer’s techniques every day on one board type, we saved 257 hours of touch up and rework per month.  This saved our facility over $50,000 in 12 months on this one board type alone.”

– John Lanferman, Process Characterization Group Leader, Celestica

“The Optimizer made us re-think how we should wave solder.  We shouldn’t blame the board design as often and we cannot rely on a thermal profiler to control our wave process.”

– Martin Orozco, Process Engineer, TRW Automotive

“Your instructor solved our excessive solder and bridging by adjusting our process based on our Optimizer’s data, and showed us how we can easily do this by ourselves.”

– Gary Wirth, Production Supervisor, Honeywell

“Your company walked in here and quickly showed my staff how to reduce defects that we’ve had to live with for a long time.”

– Dennis Herrick, Director of Operations, Condor

“The Optimizer identified the root cause of chronic skipping on our boards.  We eliminated the disparallelism it measured.  This had an immediate, positive effect on board quality.”

– Aldrina Paredes, Training manager, Bose Electronics

“I have worked with wave solder machines for years and can honestly say that this was the most informative and thorough class that I have attended on this subject.

– Dale Shedd, Process Engineer, Adtran

“In all my years in PCB assembly, I have never seen such an enthusiastic response to a training program.  Other vendors never really improved our problems like you have.”

– Luis Velazquez, Engineering Manager, Plexus

“Prior to investing in the Optimizer, we relied on a thermal profiler but we could not solve our skipping and insufficients problems.  In fact, those defects were not due to improper temperatures at all but instead to how our boards run through our solder waves.”

– Ricardo Soto, Process Engineering Manager, Tyco

Contact Us