Technology Information Corporation

Customer Resources

A number of resources are available to Wave Optimizer users, free of charge. 

  • To request any of the above resources, provide the following information and click the Request A Resource button. Please fill in all fields.

“Your company walked in here and quickly showed my staff how to reduce defects that we’ve had to live with for a long time.”

– Dennis Herrick, Director of Operations, Condor

“The Optimizer made us re-think how we should wave solder.  We shouldn’t blame the board design as often and we cannot rely on a thermal profiler to control our wave process.”

– Martin Orozco, Process Engineer, TRW Automotive

“The Optimizer identified the root cause of chronic skipping on our boards.  We eliminated the disparallelism it measured.  This had an immediate, positive effect on board quality.”

– Aldrina Paredes, Training manager, Bose Electronics

“I have worked with wave solder machines for years and can honestly say that this was the most informative and thorough class that I have attended on this subject.

– Dale Shedd, Process Engineer, Adtran

“Your wave soldering seminar gave us concrete methods and procedures completely different and beyond anything we’ve ever heard or seen from other vendors or ‘experts’.”

– Juan Guevara, SMT and Through Hole Manager, Alps Automotive

“We thought we had tried everything possible to eliminate a bridging problem.  Using the Optimizer, in only a couple of minutes we got rid of the bridging completely by adjusting the dwell time.”

– Alfred Santilla, Wave Solder Supervisor, Universal Lighting

“Your instructor solved our excessive solder and bridging by adjusting our process based on our Optimizer’s data, and showed us how we can easily do this by ourselves.”

– Gary Wirth, Production Supervisor, Honeywell

“Prior to investing in the Optimizer, we relied on a thermal profiler but we could not solve our skipping and insufficients problems.  In fact, those defects were not due to improper temperatures at all but instead to how our boards run through our solder waves.”

– Ricardo Soto, Process Engineering Manager, Tyco

“Our main problem was recurring insufficients.  We made many attempts to address the problem, to no avail.  By using the Optimizer to graph our immersion depth, we identified and corrected turbulence in our main wave.  This has benefited our production process.”

– Jose Martinez, Maintenance Engineering Supervisor, Rain Bird

“Many of our voids and insufficients were assumed to be design defects.  Your training instructor used our Optimizer’s measurements to make adjustments easily and now we should never see these defects in our production again.  What a relief!”

– Enda Moran, manufacturing Manager, CEL

Contact Us