Technology Information Corporation

Wave Optimizer

Print The Brochure

  The most widely used, proven, popular,
battle-tested, cost-cutting
wave soldering tool
in the world.

“The proactive nature of your methodology, which allows us to identify board defects and production issues before they happen, is critical for raising yields.”

– Luis Lopez, Operations Manager, Benchmark Electronics

“Using the Optimizer’s techniques every day on one board type, we saved 257 hours of touch up and rework per month.  This saved our facility over $50,000 in 12 months on this one board type alone.”

– John Lanferman, Process Characterization Group Leader, Celestica

“The Optimizer identified the root cause of chronic skipping on our boards.  We eliminated the disparallelism it measured.  This had an immediate, positive effect on board quality.”

– Aldrina Paredes, Training manager, Bose Electronics

“Your company walked in here and quickly showed my staff how to reduce defects that we’ve had to live with for a long time.”

– Dennis Herrick, Director of Operations, Condor

“Su instructor resolvió el problema de soldadura excesiva y los cortos ajustando nuestro proceso según los datos de nuestro Optimizador, y nos mostró la manera en que podemos hacer esto nosotros mismos”.

Gary Wirth, Supervisor de producción, Honeywell

“We thought we had tried everything possible to eliminate a bridging problem.  Using the Optimizer, in only a couple of minutes we got rid of the bridging completely by adjusting the dwell time.”

– Alfred Santilla, Wave Solder Supervisor, Universal Lighting

“Your wave soldering seminar gave us concrete methods and procedures completely different and beyond anything we’ve ever heard or seen from other vendors or ‘experts’.”

– Juan Guevara, SMT and Through Hole Manager, Alps Automotive

“Many of our voids and insufficients were assumed to be design defects.  Your training instructor used our Optimizer’s measurements to make adjustments easily and now we should never see these defects in our production again.  What a relief!”

– Enda Moran, manufacturing Manager, CEL

“Prior to investing in the Optimizer, we relied on a thermal profiler but we could not solve our skipping and insufficients problems.  In fact, those defects were not due to improper temperatures at all but instead to how our boards run through our solder waves.”

– Ricardo Soto, Process Engineering Manager, Tyco

“The Optimizer made us re-think how we should wave solder.  We shouldn’t blame the board design as often and we cannot rely on a thermal profiler to control our wave process.”

– Martin Orozco, Process Engineer, TRW Automotive

Contact Us